The Multi Tool of Lighting Control Hubs
SPH.27/48-R DALI HARDWIRED HUB WITH RELAYS
The SPH.27-R and SPH.48-R are fully addressable, digitally controlled DALI hardwired hubs, connected to the SPX Lighting Area Controllers via the M-Bus horizontal bus network.
Typically situated in the riser by the distribution board, these devices are ideally suited to control lighting in spaces where locating Lighting Control Modules in the field may not be an option.
These units are designed to take up to 2 lighting circuits, and provide a Live Out, Switched Live and a Maintained Live for each. This gives the option to mix DALI and non-DALI equipment, as well as an option to control Water Solenoid Valves.
Utilising DALI short addressing, all lighting connected is individually controllable once commissioned.
Key Benefits:
- Fully addressable lighting via DALI
- Mains circuit terminations provide an ideal first fix wiring point
- Supplies DALI and mains power to lighting from single source
- Built-in E-Bus drivers with capacity to take up to 24 input devices
- Supports DALI bus connected SPECS sensors
- All variants are compatible with the Simmtronic DALI Automated Emergency Testing System
- Live status and reporting available via SPECS Manager and Viewers
- Variants can be supplied pre-fitted with 6 pole sockets for flexible modular wiring options
Specific key features
SPH.27-R DALI HARDWIRED HUB WITH RELAYS
- Unit provides 2no DALI only outputs
- Each output has capacity for – 20 DALI drivers | 10 DALI emergency inverters
- Each output has a dedicated Switched Live relay, allowing for non-DALI devices to be switched independently of the lighting circuit
- Live lamp and control gear status via graphical viewers
- Digital dimming provided to an accuracy better than 1%
SPH.48-R DALI HARDWIRED HUB WITH RELAYS
- Unit provides 2no DALI only outputs
- Each output has capacity for – 40 DALI drivers | 20 DALI emergency inverters
- Each output has a dedicated Switched Live relay, allowing for non-DALI devices to be switched independently of the lighting circuit
- Live lamp and control gear status via graphical viewers
- Digital dimming provided to an accuracy better than 1%
Specifications
ELECTRICAL – 230VAC 50Hz
MAX LOAD – 10 amps per circuit
WEIGHT – 1.5kg
INGRESS PROTECTION – IP20
Product dimensions
Product comparisons
SPH.27-R
SPH.48-R
DALI outputs
2
2
DALI addressable outputs - Ballast
2x20
2x40
DALI addressable outputs - Emergency inverter
2x10
2x20
DALI addressable outputs - Control devices
2x12
2x12
Supports Automated Emergency Testing
Supports software configurable Manual Emergency Testing
Full DALI addressability
Supports load shedding
Built in fade-processing
Live lamp and gear control status via graphical viewers
Switching relay mains termination inputs and outputs
2
2
Supports DALI bus connected SPECS sensors
Suitable for use with modular wiring systems
Check out the range
SPH.27/48 and 227/248 DALI2 Hardwired Hub
SPH.27/48 and 227/248 DALI2 Hardwired Hub
SPV.56/57 Compact DALI Lighting Control Modules
SPV.56/57 Compact DALI Lighting Control Modules
SPO.227/248 DALI Intelligent Modular Distribution Box
SPO.227/248 DALI Intelligent Modular Distribution Box
SPV.92 Pluggable Lighting Control Modules
SPV.92 Pluggable Lighting Control Modules
SPH.27/48-R DALI Hardwired Hub With Relays